Airboss AW-280GL 1″ Long Shaft Lightweight Impact Gun
The Airboss AW-280GL 1″ drive air impact gun with a 6″ anvil, which is for seized, rusted or over-tightened nuts. It delivers 550 – 1,500 Nm of working torque and up to 2,000 Nm, yet weights only 7.3kg, which is a light 1-inch gun. Additionally it comes with Jonair Service’s unconditional 12-month warranty.
- 1″ drive, 6″ anvil (extended)
- Working torque 550 – 1,500 Nm (Max 2,000 Nm)
- Twin-hammer mechanism, 4,500 rpm free speed
- Rated for bolts up to 38 mm
- 7.3kg, 508 mm long
- Uses 500 L/min of air at 6.2 bar (90 psi)
Unconditional 12-month warranty. Includes free name engraving. Service from Bell Park, Geelong.
What the AW-280GL is built for
The AW-280GL is made by Airboss Air Tools, based in Taichung, Taiwan. It’s built for heavy truck, agricultural and earthmover wheel nuts. Plus seized nuts that a 3/4″ impact gun won’t shift.
The long shaft reaches wheel nuts set back in the wheel without an extension bar.
For everyday truck, bus and trailer wheels, the 3/4″ Airboss AB230PL is lighter at 4.2 kg and covers bolts up to 23 mm.

Features
6″ anvil reaches recessed wheel nuts
The long anvil reaches nuts sitting deep in a truck wheel, so a standard impact socket goes straight on. An extension bar reduces impact, so working without one puts more of the gun’s torque on the nut.
Torque for the biggest nuts in the workshop
It delivers 550 – 1,500 Nm of working torque, up to 2,000 Nm max, and is rated for bolts up to 38 mm. That’s the range for large wheel nuts and fasteners a 3/4″ inch gun won’t move.
Light Magnesium-alloy body
Airboss’s patented magnesium-alloy housing brings the gun to 7.3kg (16.1 lb). That’s light for a 1″ gun, which matters when it’s held at wheel height through a shift. Airboss designed it to reduce user fatigue.
Specifications
| Model | AW-280GL |
| Drive | 1″ square |
| Anvil | 6″ (long) |
| Body | Straight type, magnesium alloy |
| Handle | [confirm: side handle or D-handle] |
| Bolt capacity | 38 mm |
| Mechanism | Twin hammer |
| Free speed | 4,500 rpm |
| Working torque | 550–1,500 Nm (405–1,107 ft-lb) |
| Max torque | 2,000 Nm (1,475 ft-lb) |
| Overall length | 508 mm |
| Weight | 7.3 kg (16.1 lb) |
| Air consumption | 500 L/min (0.5 m³/min, about 18 CFM) |
| Air inlet | 1/2″ [confirm: thread type supplied] |
| Recommended air hose | 12.7 mm (1/2″) |
| Working pressure | 6.2 bar (6.3 kg/cm², about 90 psi) |
Frequently asked questions
- How heavy is it? 7.3 kg (16.1 lb), light for a 1″ gun due to its magnesium-alloy body.
- How much torque does it have? 550 – 1,500 Nm working torque and 2,000 Nm max.
- Do I need a 1″ gun for truck wheels? Not for everyday work. The 3/4″ AB230PL covers 23 mm bolts at 4.2 kg. The AW-280GL is for bigger nuts, up to 38 mm, or ones the 3/4″ won’t shift.
- Can I tighten wheel nuts to spec with it? No. Run them on with the gun, then the final tighten with a calibrated torque tool to the vehicle maker’s figure.
- What compressor do I need? One that delivers at least 500 L/min (about 18 CFM) at 6.2 bar (90 psi).
- What hose and fittings? A 12.7 mm (1/2″) hose and a 1/2″ inlet fitting.
- What warranty does it have? 12 months unconditional.
Talk to Jonair
Add to your quote or call 03 5277 9932, Monday to Friday, 7:30am – 4pm. 1/20 Tarkin Court, Bell Park VIC 3215.



Be the first to review “Airboss AW-280GL 1″ Long Shaft Impact Gun for Truck Wheel”