Airboss AB200PL 1/2″ Impact Gun
The Airboss AB200PL is a light and fast 1/2″ drive air impact gun for car, SUV, ute and 4WD wheels. At 2.9kg with a long anvil and 6,800 rpm free speed, it spins wheel nuts off quickly and reaches into alloy wheels. It also comes with Jonair Service’s unconditional 12-month warranty.
- 1/2″ drive, long anvil for alloy wheels
- 2.9kg, 198mm long
- 6,800 rpm free speed
- Working torque 68 – 808 Nm; max 1,860 Nm
- Rated for bolts up to 19 mm
- Uses 300 L/min of air at 6.2 bar (90 psi) through a 100mm hose
Unconditional 12-month warranty. Includes free name engraving. Service from Bell Park, Geelong.
What the AB200PL is built for
The AB200PL is a 1/2 impact gun made by Airboss Air Tools, based in Taichung, Taiwan. It is sized for the wheels most workshops work with every day including cars, SUVs, utes, vans and 4WDs.
It’s rated for bolts up to 19 mm, which covers the M12 and M14 wheel studs on most passenger vehicles and 4WDs. It suits tyre shops, mechanical workshops and mobile tyre fitters who handle a steady stream of passenger wheels.
For truck, bus and trailer wheels, step up to the 3/4″ Airboss AB230PL.

Features
Light enough for car after car
At 2.9kg and 198mm long, it is easy to hold at hub height all day long and compact enough to work around wheel arches and bodywork. That is 1.3 kg lighter than the 3/4″ AB230PL, which adds up over a day of tyre changes and rotations.
Fast on and off
A 6,800 rpm free speed spins nuts off in seconds. Across a busy day of tyre fitting, rotations and break jobs, that is a real time saver on every car.
Long anvil reaches into allow wheels
Many alloy wheels set their nuts deep into narrow holes. The long anvil reaches them with a thin wall impact socket and does not require an extension bar, keeping the gun body back from the wheel face, so its less likely to mark the finish.
Power for seized 4WD nuts
Older cars and 4WDs that have seen beach, mud or salt often have nuts that will not budge. The twin hammer mechanism is rated up to 1,860 Nm, so one gun covers everyday wheels and stubborn ones.
Specifications
| Model | AB-200PL |
| Drive | 1/2″ square |
| Anvil | Long [confirm: 2.5″] |
| Bolt capacity | 19 mm |
| Mechanism | Twin hammer |
| Free speed | 6,800 rpm |
| Working torque | 68–808 Nm (50–596 ft-lb) [confirm] |
| Max torque | 1,860 Nm (1,372 ft-lb) [confirm] |
| Overall length | 198 mm [confirm] |
| Weight | 2.9 kg (6.4 lb) [confirm] |
| Air consumption | 300 L/min (0.3 m³/min, about 11 CFM) |
| Air inlet | 1/4″ [confirm: thread type supplied] |
| Recommended air hose | 10 mm (3/8″) |
| Working pressure | 6.2 bar (6.3 kg/cm², about 90 psi) |
Frequently asked questions
- Is a 1/2″ gun right for car and 4WD wheels? Yes. It is rated for bolts up to 19 mm, which includes the M12 and M14 studs on most passenger vehicles, and at 2.9 kg it is comfortable all day.
- Will it over-tighten my wheel nuts? It can. Which is why you should only run nuts. Final tighten with a torque wrench to the vehicle maker’s requirements.
- Will it scratch alloy wheels? Not with the right socket. Use a thin-wall impact socket with a protective sleeve. The long anvil keeps the tool’s body back from the wheel face.
- Can it free rusted or seized nuts? Its twin hammer mechanism is rated up to 1,860 Nm max, so it can handle most stubborn passenger and 4WD nuts.
- What compressor do I need? One that delivers more than 300 L/min (about 11 CFM) at 6.2 bar (90 psi).
- What hose and fittings? A 10 mm (3/8″) hose and a 1/4″ inlet fitting.
- Can I use it on light trucks? For light commercial vans and utes, yes. For trucks with M22 studs, use the 3/4″ AB230PL.
- Can I get my name engraved on it? Included with every sale.
Talk to Jonair
Add to your quote or call 03 5277 9932, Monday to Friday, 7:30am – 4pm. 1/20 Tarkin Court, Bell Park VIC 3215.



Be the first to review “Airboss AB-200PL 1/2″ Impact Gun for Car and 4WD”